JSMTek

I'm not sure if I understand what you mean by cycling power.

But I forgot to mention that this is a PA device.

 Hi, I have a same problem. How did you solve it?

There are several ways how you can solve it, depending on the FW version.

1. If available change parameter 1.YFCT from e.g. "turn" to "-turn"  or from "way" to "-way" to invert the direction of action.

2. If available change parameter x.SDIR from "rise" to "fall", this will change setpoint direction
    For feedback and display direction, change parameter x.YDIR from "rise" to "fall", too

3. Change parameter 2.YAGL from 33° to 90°   or  from 90° to 33°.  This parameter is only to invert the direction of action because the transmission switch will change the direction, too.

4. in case you use a double acting positioner, you just change Y1 and Y2 output to the actuator and repeat the initialization.