You cannot directly "upload" the CFC's. The compiled CFC program is stored in blocks and these get loaded to the CPU or the memory module. So after plugging in the memory module click on the “Memory card” icon and you’ll be able to see all the blocks. You can select these blocks to a different project. Remember that if the original program is password protected in the CPU you have to know the password to complete the copy operation.

hatem eid

Thanks , phantom
you mean that just copy the contents of flash memory blocks , and paste in new empty project, just this , or there is any setting must check . . .

hatem eid

. . . could any one tell me the detailed procedures for this? . . .

There is no formal procedure for “uploading” CFC’s from a memory card. You can copy the blocks to a new project (as stated before) but what about HW config? Without proper HW config the uploaded project will not work!

Merry Christmas!