Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s5

Created by: Hocinov at: 2/8/2011 1:19 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/8/2011 1:19 PM	Rate (0)
Hocinov Regular Member Joined: 11/10/2010 Last visit: 12/3/2023 Posts: 24 Rating: (0)	Hi all,Please i need help to start a 115U cpu from EEprom.Why doesn't work despite all the devices areok. After a reset the red led on the cpu keep the stop statut. the EEprom cardridge and the programm on the EEprom are tested good in another machine.The cpu without EEprom can be set in Run statut after a reset. Thank you

Suggestion To thank Quote Answer

2/8/2011 2:08 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Not all CPU's work with all memory modules, see manual chapter 4.2.2 http://support.automation.siemens.com/WW/view/en/1085937 You'ill find the procedure to load from Eeprom there too.
	Last edited by: Marcjan at: 2/8/2011 2:16 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on