Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FB58 PID auto-tune

Created by: Tomy Master at: 4/12/2011 1:28 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

4/12/2011 1:28 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 5/28/2024 Posts: 914 Rating: (40)	Dear friends, Would you please provide me with a documentation or a video file explaining how to perform auto-tuning with FB58. Thank you in advance. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

4/12/2011 8:41 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Tomy Master Would you please provide me with a documentation or a video file explaining how to perform auto-tuning with FB58. Please check the attachment for a sample project embeded in STEP7 (ZEN01_13_STEP7_PID-TEMP). Check the following manual: PID Temperature Control CH.3 Controller Tuning in FB 58 "TCONT_CP" regards Attachment 1.jpg (1613 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer

4/12/2011 9:14 PM	Rate (1)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	Also check the following snapshot for controller and tuner's parameter when you want to start tuning procedure.The values assigned for each variable is a good starting point for checking the algorithm. Uncomment the vaues and apply changes.See attachment for more details. regards Attachment tuner_parameter.zip (1862 Downloads)
	Last edited by: hdhosseini at: 12/10/2018 9:16:50 PM Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on