Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 Basic Motion V3.0

Created by: Gerdoo at: 4/23/2012 5:21 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

4/23/2012 5:21 PM	Rate (0)
Gerdoo Posts: 23 Rating: (2)	Hi, Whatare the changes and improvements of S7-1200 Basic Motion V3.0 function blocks comparing to previous versions? with installing UPD2 all of them are V3.0 now. Attachment MC V3.0.jpg (483 Downloads)
Gerdoo Posts: 23 Rating: (2)
Suggestion To thank Quote Answer

4/25/2012 12:49 PM	Rate (0)
FreakOnALeash Posts: 267 Rating: (24)	Hello, what I know is: V1: only Motion Control blocks V2: Motion Control blocks + MC_ChangeDynamic + Command Table V3: the only difference I found is that there is the possiblity to set a seperator in the Command Table (no difference in the function, only is the visualization of the wizard)
FreakOnALeash Posts: 267 Rating: (24)
Suggestion To thank Quote Answer

4/27/2012 12:39 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 10/22/2024 Posts: 2198 Rating: (328)	I got this informations: The V3 includes new functions, that can be used with the S7-1215 (with FW3.0, just presented on the Hannover fair). These are: Up to 4 axis possible. A axis will not block aHigh Speed Counter any more, so the user can use all nominal HSC and up to 4 axis.

Suggestion To thank Quote Answer

4/27/2012 2:09 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/8/2024 Posts: 15388 Rating: (2443)	miami I got this informations: The V3 includes new functions, that can be used with the S7-1215 (with FW3.0, just presented on the Hannover fair). These are: Up to 4 axis possible. A axis will not block aHigh Speed Counter any more, so the user can use all nominal HSC and up to 4 axis. Can you PM me more about the S7-1215?
	science guy
Suggestion To thank Quote Answer

4/27/2012 2:46 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 10/22/2024 Posts: 2198 Rating: (328)	Hello, I have not more information as you and Iposted here: /tf/WW/en/Posts/73271

Suggestion To thank Quote Answer

5/4/2012 9:50 AM	Rate (0)
FreakOnALeash Posts: 267 Rating: (24)	There is a new documentation about S7-1200 motion control: http://support.automation.siemens.com/WW/view/en/60444032 The version innovations are listed on page 23. But the CPU 1215C isn't mentioned.
FreakOnALeash Posts: 267 Rating: (24)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on