Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 314C-2 PN/DP counter sample program

Created by: s_vb at: 3/28/2013 4:57 PM (2 Replies)

Rating (0)

Thanks 3

3 Entries

3/28/2013 4:57 PM	Rate (0)
s_vb Bronze Member Joined: 10/24/2011 Last visit: 3/9/2023 Posts: 257 Rating: (1)	Hello Everyone, I have doubt regarding Counting mode in CPU 314C-2 PN/DP. Where can I find its sample project? Where can I get the SETUP.EXE file which is mentioned in Manual "S7-300 Getting Started - Commissioning a CPU 31xC: Counting". Is there any sample program availble? Please guide me Thanks, Shailesh

Suggestion To thank Quote Answer

3/30/2013 9:52 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating: (709)	Hi s_vb, Reading the manual you should have a CD in the box. Have a look: CPU 31xC: Technological functions - Siemens Industry Online Support
	Last edited by: Ste39 at: 3/30/2013 10:18 AM
Suggestion To thank Quote Answer

3/30/2013 4:52 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, In case you don't have a CD: Sample programs for CPU 31xC Technological Functions V1.0 Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users michal.lach Ste39 eteko

|

Share this page:

Share this page on...

Follow us on