Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can we use PID Lean more than one time in a program?

Created by: AmitC at: 9/11/2013 2:34 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/11/2013 2:34 PM	Rate (0)
AmitC Posts: 22 Rating: (0)	Dear All, Can we use PID Lean more than one time in a program? If yes, How? I want to use 4 PID blocks in one program in TIA portal V11. Please help....
AmitC Posts: 22 Rating: (0)	Last edited by: CS Moderator at: 9/12/2013 2:14 PM new subject after splitting from /tf/WW/en/Posts/45886#top Last edited by: AmitC at: 9/11/2013 2:37 PM
Suggestion To thank Quote Answer

9/11/2013 2:38 PM	Rate (0)
AmitC Posts: 22 Rating: (0)	Dear All, Can we use PID Lean 4 times in a program? If yes, How? I want to use 4 PID blocks in one program in TIA portal V11. Please help....
AmitC Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

9/11/2013 4:53 PM	Rate (0)
BryanG2001 Posts: 113 Rating: (22)	I think that the only limit would be the available memory in the PLC, and maybe time the cycle time. Each time you drag a new PID instruction in to your program it will create a new Instance Data Block.
BryanG2001 Posts: 113 Rating: (22)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on