Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7 315-2PN/DP, which interfaces has PLC, connect to SCADA

Created by: Chandra Tiwari at: 3/12/2014 7:13 AM (3 Replies)

Rating (1)

Thanks 4

4 Entries

3/12/2014 7:13 AM	Rate (0)
Chandra Tiwari Posts: 247 Rating: (2)	Hi Fritz, I have S7 315-2PN/DP PLC of MLFB no.6ES7315-2EH14-0AB0 my questions are: 1) It is having 2 Ethernet port (RJ45) or only 1 port? 2) If its having 2 RJ45 port, can i connect, SCADA with 1 RJ45 port and HMI with other RJ45 port? 3) I believe the MAC ID of both RJ45 ports will be same, in this case any issue in NetPro connection? Thanks in advance :)
Chandra Tiwari Posts: 247 Rating: (2)	Last edited by: GrasserF at: 3/12/2014 8:30 AM new subject after splitting from /tf/WW/en/Posts/85130
Suggestion To thank Quote Answer

3/12/2014 8:12 AM	Rate (1)
S7 AUTOMAN Posts: 515 Rating: (56)	RaviS Hi Fritz, I have S7 315-2PN/DP PLC of MLFB no.6ES7315-2EH14-0AB0 my questions are: 1) It is having 2 Ethernet port (RJ45) or only 1 port? 2) If its having 2 RJ45 port, can i connect, SCADA with 1 RJ45 port and HMI with other RJ45 port? 3) I believe the MAC ID of both RJ45 ports will be same, in this case any issue in NetPro connection? Thanks in advance :) hi, 1) It is having 2 Ethernet port (RJ45) or only 1 port? it is having two ports like an integrated switch 2) If its having 2 RJ45 port, can i connect, SCADA with 1 RJ45 port and HMI with other RJ45 port? yes you can connect. both your SCADA and HMI is going to communicate with the same CPU. 3) I believe the MAC ID of both RJ45 ports will be same, in this case any issue in NetPro connection? it will have the same MAC/IP address. the two ports acts as an integrated switch and the functionality will be the same as well.
S7 AUTOMAN Posts: 515 Rating: (56)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users IBN-Service Chandra Tiwari AM0709

3/12/2014 9:28 AM	Rate (0)
Chandra Tiwari Posts: 247 Rating: (2)	Hi S7 Automan, Thanks for your quick responce
Chandra Tiwari Posts: 247 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S7 AUTOMAN

7/18/2017 2:07 PM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by minegirl is split to a separate thread with the subject Problem with the SCADA interface for the pH transmitter. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on