Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Setting up CMR2020

Created by: Pattedog at: 1/7/2016 6:31 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/7/2016 6:31 PM	Rate (0)
Pattedog Posts: 30 Rating: (2)	Hi. Having some problems with the CMR2020 module. I would like to send a sms to the module so it sets (for example) output 1 on the cmr or on the BM. I have manage so the module sends a sms to me if input 1 sets to 1
Pattedog Posts: 30 Rating: (2)
Suggestion To thank Quote Answer

1/7/2016 6:53 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/4/2024 Posts: 34140 Rating: (4254)	Look here... https://support.industry.siemens.com/cs/document/105074237/-monitoring-and-control-with-the-logo!-cmr-module-?dti=0&pnid=13617&lc=en-DE

Suggestion To thank Quote Answer

1/8/2016 2:12 PM	Rate (0)
Pattedog Posts: 30 Rating: (2)	Thanks, will try again this weekend :)
Pattedog Posts: 30 Rating: (2)
Suggestion To thank Quote Answer

1/11/2016 9:36 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by karthikk is split to a separate thread with the subject Setup and change user details of CMR with LOGO BM or LOGO TDE. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on