Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

STRUC to CFC convert error 6001

Created by: Bennydel at: 4/27/2016 1:00 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

4/27/2016 1:00 PM	Rate (0)
Bennydel Posts: 39 Rating: (0)	I'm trying to convert a STRUC project into CFC. I use the "D7-SYS - STRUC G - Transformation" program and select the *.cmp file. Then I get the message: the file is erronious (error 6001), no extra details. I also did the test with another project, and got the same error.
Bennydel Posts: 39 Rating: (0)
Suggestion To thank Quote Answer

4/27/2016 1:16 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. It looks like you try to convert a STRUC-program for 16-bit CPU. D7-SYS - STRUC G - Transformation works only for 32-bit CPU's.

Suggestion To thank Quote Answer

4/27/2016 1:28 PM	Rate (0)
Bennydel Posts: 39 Rating: (0)	KSN Hello. It looks like you try to convert a STRUC-program for 16-bit CPU. D7-SYS - STRUC G - Transformation works only for 32-bit CPU's. Thx for the answer. Is there any way to convert the 16-bits projects?
Bennydel Posts: 39 Rating: (0)
Suggestion To thank Quote Answer

4/27/2016 1:31 PM
Navnag Platinum Member Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	KSN Hello. It looks like you try to convert a STRUC-program for 16-bit CPU. D7-SYS - STRUC G - Transformation works only for 32-bit CPU's. ( Out of Ratings )
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion Quote Answer

4/27/2016 1:39 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Bennydel Is there any way to convert the 16-bits projects? You can always convert it manually. I.e. looking in STRUC program and create the same in CFC.

Suggestion To thank Quote Answer

4/27/2016 1:44 PM	Rate (0)
Bennydel Posts: 39 Rating: (0)	KSN Bennydel Is there any way to convert the 16-bits projects? You can always convert it manually. I.e. looking in STRUC program and create the same in CFC. The long way :) thx.
Bennydel Posts: 39 Rating: (0)
Suggestion To thank Quote Answer

2/20/2017 3:03 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by radian86 is split to a separate thread with the subject Document for 6DD1672-0AB0. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on