Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

exchange data between CPU S7 1200 and CPU S7 1500 with SCALANCE X208

Created by: Latifa at: 6/26/2016 7:15 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

6/26/2016 7:15 PM	Rate (0)
Latifa Posts: 5 Rating: (0)	Hello, I'm trying to exchange data between CPU S7 1200 and CPU S7 1500. They are connected through SCALANCE X208 (profinet). How can i do that? thank you very much ------------------------------------------------------------------------------------------ Split from S7-1500 with S7-1200 communication.
Latifa Posts: 5 Rating: (0)	Last edited by: Latifa at: 6/26/2016 7:15:53 PM Last edited by: Min_Moderator at: 6/27/2016 9:45:54 AM New subject after splitting
Suggestion To thank Quote Answer

6/26/2016 8:11 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	Latifa Hello, I'm trying to exchange data between CPU S7 1200 and CPU S7 1500. They are connected through SCALANCE X208 (profinet). How can i do that? thank you very much Hello, you talk about real plc's? on of the PLC must be configured in IO-Device mode, this can be done in the properties of the PROFINET Interface. Then you can configure transferareas for this device. In the network view the assign the PLC in IO-Device Mode to the other PLC and download this configuration. Regards Christoph

Suggestion To thank Quote Answer

6/26/2016 8:20 PM	Rate (0)
William_B Posts: 5225 Rating: (1196)	ChristophD Latifa Hello, I'm trying to exchange data between CPU S7 1200 and CPU S7 1500. They are connected through SCALANCE X208 (profinet). How can i do that? thank you very much Hello, you talk about real plc's? on of the PLC must be configured in IO-Device mode, this can be done in the properties of the PROFINET Interface. Then you can configure transferareas for this device. In the network view the assign the PLC in IO-Device Mode to the other PLC and download this configuration. Regards Christoph Hi Christoph. The question by Latifa has nothing to do with the question posted by ASIMO99. Is IO-Device the only communication method through a SCALANCE X208? ..or would other Ethernet based communications be possible? w
William_B Posts: 5225 Rating: (1196)
Suggestion To thank Quote Answer

6/27/2016 6:41 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/18/2024 Posts: 22453 Rating: (3030)	William_B Hi Christoph. The question by Latifa has nothing to do with the question posted by ASIMO99. Is IO-Device the only communication method through a SCALANCE X208? ..or would other Ethernet based communications be possible? w Hi, he can use all other communication like put/get, this have nothing to do with the scalance. Regards Christoph

Suggestion To thank Quote Answer

6/27/2016 9:49 AM	Rate (0)
ASIMO99 Posts: 52 Rating: (1)	Hello Chris, What's the main differences between IO device communication and S7 connection ? IO communication is faster, real time communication? if the S7-1200 is the IO device it does not have a program? it acts like an IM ? Thanks ChristophD William_B Hi Christoph. The question by Latifa has nothing to do with the question posted by ASIMO99. Is IO-Device the only communication method through a SCALANCE X208? ..or would other Ethernet based communications be possible? w Hi, he can use all other communication like put/get, this have nothing to do with the scalance. Regards Christoph
ASIMO99 Posts: 52 Rating: (1)
Suggestion To thank Quote Answer

7/20/2016 11:51 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by Benil is split to a separate thread with the subject PCS 7 scalance x208, how to add other device in the configuration. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on