Navigation

MF Sprint 42, & facing chuck clamping issue for both spindle

Created by: SDGADHE at: 9/21/2016 5:33 PM (1 Replies)

9/21/2016 5:33 PM	Rate (0)
SDGADHE Posts: 10 Rating: (0)	Hello, We have MF Sprint 42, & facing chuck clamping issue for both spindle. Can u suggest me interlocks or solution? ------------------------------------------------------------------------------------------ Split from Siemens 840c controller gildermeister mf sprint 65 machine! .
SDGADHE Posts: 10 Rating: (0)	Last edited by: Min_Moderator at: 9/23/2016 12:34:07 PM New subject after splitting
Suggestion To thank Quote Answer

9/21/2016 9:50 PM	Rate (0)
nulizhang Platinum Member Joined: 10/17/2007 Last visit: 12/20/2024 Posts: 4115 Rating: (358)	Hi, SDGASHE, PLEASE check this link, then ask you question again https://support.industry.siemens.com/tf/de/en/posts/tip-for-creating-a-new-thread/87964/?page=0&pageSize=10 Here is Siemens CNC forum, not Gildermeister m/c builder forum. another suggestion is you direct contact Geldermeister for support, I myself company has more than 20 Gildermeister m/c's from old to new I sometimes also call them for help SDGADHE Hello, We have MF Sprint 42, & facing chuck clamping issue for both spindle. Can u suggest me interlocks or solution?
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer