Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to unlock multiranger 100.i have entered the default password 1954 still i unable to unlock and can't change the parameters.

Created by: hrushi10 at: 8/21/2017 12:24 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/21/2017 12:24 PM	Rate (0)
hrushi10 Posts: 1 Rating: (0)	How to unlock multiranger 100.i have entered the default password 1954 still i unable to unlock and can't change the parameters. ------------------------------------------------------------------------------------------ Split from Field PG M4 Windows XP SP3 Support from Microsoft.
hrushi10 Posts: 1 Rating: (0)	Last edited by: The Helping Hand at: 8/22/2017 10:33:05 AM New subject after splitting
Suggestion To thank Quote Answer

8/22/2017 3:26 PM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Hi Hrushi, Can you try P0 = 1956 ? Best regards, Chook
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

8/24/2017 3:06 PM	Rate (0)
danw Gold Expert Joined: 3/28/2010 Last visit: 10/31/2024 Posts: 1074 Rating: (214)	I am grateful that I have never had to unlock a Multi/Hydro because there does not seem to be a backdoor method unless the current password is known. P000 is supposed to be the default value 1954. P069 is where alternative values are written. Here's what the manual says about 069: ---deleted Link--- Please post a solution is you discover it. Attachment P069_Password.jpg (286 Downloads)
	Last edited by: Jen_Moderator at: 8/25/2017 12:12:28 PM Added figure as an attachment.
Suggestion To thank Quote Answer

8/31/2017 3:05 PM	Rate (0)
Levelmans Bronze Member Joined: 12/13/2012 Last visit: 10/5/2023 Posts: 124 Rating: (45)	If the changed password of P069 is not known anymore ==> - Change P000 to -592 (minus 592) - Look at P069 you will see what the current password is. Hope this helps !

Suggestion To thank Quote Answer

9/25/2017 10:03 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by anbuentello89 is split to a separate thread with the subject Want to add another transducer XPS-10 but Multiranger just detected the first transducer. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on