Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Is it possible to create alarm history in WinCC Flexible?

Created by: PPOPOPO at: 3/12/2018 5:54 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/12/2018 5:54 PM	Rate (0)
PPOPOPO Posts: 2 Rating: (0)	IT IS POSSIBLE IN WINCC FLEXIBLE TO CREATE ALRAM HISTORY . IF YES . HOW IT IS CREATED IN WINCC FLEXIBLE. ------------------------------------------------------------------------------------------ Split from converting wincc flexible to wincc explorer.
PPOPOPO Posts: 2 Rating: (0)	Last edited by: Jen_Moderator at: 3/13/2018 7:38:19 AM New subject after splitting
Suggestion To thank Quote Answer

3/12/2018 8:29 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 11/6/2024 Posts: 4193 Rating: (472)	PPOPOPO IT IS POSSIBLE IN WINCC FLEXIBLE TO CREATE ALRAM HISTORY . IF YES . HOW IT IS CREATED IN WINCC FLEXIBLE. Shortly, insert an AlarmView to a HMI page.

Suggestion To thank Quote Answer

3/13/2018 1:27 PM	Rate (0)
Towome Platinum Member Joined: 7/9/2015 Last visit: 11/7/2024 Posts: 4022 Rating: (601)	Hi, please check this FAQ: How are tags and alarms logged in WinCC flexible? Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on