Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP524 6ES5-524-3UA13

Created by: Springtea at: 7/12/2010 2:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/12/2010 2:51 PM	Rate (0)
Springtea Posts: 7 Rating: (0)	Dear Expert: I read the manual about CP524 communication and understand CP524 three modes just like V.24,TTY,and RS422-A/485modes. But I do not know CP524 inerted card for these modes. Do I have any ideas to know the inerted card instead ofseeingthe serial number inworking card? I only know the conneting cable parts, one is two fiber cable ,and the other cable is pin25. And where can I find out the manual fingered out all kinds of cables'sappearances or pin feet ? ps: 1.manual is com525 probleming package for communication processors cp524 and cp525 (s5-dos). 2.I do not have com525 problems.
Springtea Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/6/2010 12:21 PM	Rate (0)
NPSK Posts: 70 Rating: (0)	Dear Springtea In the com 525 manual chapter 6 will explain the different combination of connection between 2 cp's there you find your answer
NPSK Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

2/13/2018 8:12 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by alirezaf is split to a separate thread with the subject Program to configure cp 524?. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on