2/8/2021 9:56 AM | |
Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2145)
|
Hello AutoGen_4448420, if you get this message, you try to open the project see manual "SIMATIC HMI WinCC V7.5 SP1 WinCC Information System" https://support.industry.siemens.com/cs/ww/en/view/109772961/111448773899 for correct procedure.
Georg Berghof |
PS: If this post did really help you, you may use the Rate-button |
|
2/9/2021 2:34 PM | |
Joined: 5/16/2014 Last visit: 9/12/2022 Posts: 7298 Rating: (2145)
|
Hello AutoGen_4448420, you should select the "Open" command from the shortcut menu, You should check your networkconfiguration against the FAQs: https://support.industry.siemens.com/cs/ww/en/view/868014 and https://support.industry.siemens.com/cs/ww/en/view/109769234
Georg Berghof |
PS: If this post did really help you, you may use the Rate-button |
|
Follow us on