Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication between Simoreg and S7-300

Created by: kid237 at: 12/12/2007 9:51 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/12/2007 9:51 AM	Rate (0)
kid237 Posts: 158 Rating: (3)	Hi, I am trying to set up communication between Simoreg (6RA7025)and S7-300(CPU 315). Can i get some assistance to do this? as i am still new to this field or, Is there any manuals for this purpose? Regars.
kid237 Posts: 158 Rating: (3)
Suggestion To thank Quote Answer

12/12/2007 2:08 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 6/21/2021 Posts: 10741 Rating: (2280)	Hello Suren; I found this short document on the web: http://www.automationmedia.com/Port1050%5CSiemensFreeCourses%5Cdcd_4.pdf I have extracted a few suggestions from the pdf along with some comments in he attachment below. Your CPU seems to be already chosen, with no integrated PTP port or Profibus-DP interface... I would then look into the 3rd proposal,Drives ES. Hope this helps, Daniel Chartier Attachment Simoreg_S7.jpg (157 Downloads)

Suggestion To thank Quote Answer

1/3/2008 7:26 PM	Rate (0)
Floyd Posts: 130 Rating: (1)	I have done a 315-2dp to 6RA70 w/profibus and drivesES. It worked GREAT!. I displayed a trend on a MP270 that showed significant process data, Ia, Ifield, Va, Vfield, etc. I maxed out the PZD capibilities, and the trendfeature of the HMI sure helped tuning the drive. BTW this was a motor generator set on an old RTG crane.
Floyd Posts: 130 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on