người chơi

siemens khoảng 10 năm
allen brabley slc và plc 5 khoảng 25 năm
ti 25 năm
mitubishi 25 yeras
omron 15 năm
cả plc và scada

you can be know to the interface between omron PLC and siemens PLC with prosoft port, make again. i seen video on web prosofts but i don`t known how to config network on PLC omron

Cảm ơn.

------------------------------------------------------------------------------------------
Split from How many years of experience do you have??.

javiermorales

Hi.
You have to know what kind of omron plc.
The CP1 do not have Ethernet-IP input, but they can be coupled with an Ethernet-IP front module (a non-standard product, with reference CP1W-EIP61), which allows data to be given to a 'master' CPU.They must communicate with a CJ, CS or NX, NJ with Ethernet-IP port.

 Hi javiermorales

Thank for reply.

my system have  omron (PLC CJ2M cpu 32), cpu 315PN/DP and gateway(prosoft)

They all have ethernet ports.  

i think they can communication by ethernet

so i just wanna know how to config at prosoft and omron

https://www.youtube.com/watch?v=e1FN8kH1I54&list=PL4T76kO_tfBvJy1U9JoERGMFFmaZX-u7y&index=25

javiermorales

I am enclosing one of my applications.
a greeting

 Dear javiermarales.

i seen in your project, it have many class connection (8). so when a PLC omron send data, what connection will the prosoft to receive, can i config that class? 

if i choose connect 1 (bellow) and i wanna send data from omron to the prosoft, i have to get name  for data in omron is: w0 or D0 or anything else?

i known input address is: 0:2000 and output: 2000:4000 for prosoft

thank you so much