Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KTP1000 BASIC DP Communication via Repeaters

Created by: createstars at: 9/14/2010 4:04 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/14/2010 4:04 AM	Rate (0)
createstars Advanced Member Joined: 9/22/2009 Last visit: 8/20/2011 Posts: 71 Rating: (0)	Hi all, AsI know that HMI is not a DP slave which can beconnected to the Y link due to the reason that the HMI MP377 panel is second class master. Does this applies to KTP1000 BASIC DP panel as well? And due to that reason, the HMI have to be connected to the CPU 412-3H via repeater due to this link. http://support.automation.siemens.com/WW/view/en/23842654 This link indicate that the CPUs can be connected to the HMI using two repeater. Can actually it be connected only using 1 repeater? [schnippschnapp] Your help will be much appreciable . Thank you everyone~!!! Createstars Splitted from TP Communication Via Repeaters.
	Last edited by: O_Moderator at: 9/14/2010 8:50 AM new subject after splitting
Suggestion To thank Quote Answer

9/14/2010 9:37 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/12/2019 Posts: 7441 Rating: (893)	Dear createstars, No, you can not use just one repeater. Best regards, Wizard

Suggestion To thank Quote Answer

1/18/2012 11:44 AM	Rate (0)
sks_automation Regular Member Joined: 5/11/2011 Last visit: 12/24/2018 Posts: 3 Rating: (0)	No u cant with one repeater

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on