7/26/2018 9:31 PM | |
Joined: 12/18/2014 Last visit: 8/22/2024 Posts: 33606 Rating:
|
Yes, you can convert the current signal (4-20mA) into a voltage signal (2-10V) using a 500 ohm resistor. You can determine the measuring range of the converter for the temperature yourself. There are converters where you can choose among different measurement ranges. AttachmentPressure_and_temperature_0BA8.Standard.zip (680 Downloads) |
This contribution was helpful to
1 thankful Users |
8/28/2018 6:26 PM | |
Posts: 13 Rating:
|
But with two decimals the range spans from 0.00 to 0.10,no? |
8/28/2018 7:22 PM | |
Joined: 12/18/2014 Last visit: 8/22/2024 Posts: 33606 Rating:
|
Hello exantas, here's the example for you. Attachmentexantas.zip (473 Downloads) |
Follow us on