1/26/2010 5:04 PM | |
Joined: 10/17/2007 Last visit: 9/6/2024 Posts: 4015 Rating:
|
============================= Hi, here are answers for your questions for your Ref. 1) check the link /tf/WW/en/Posts/38372#top 2) as I know there is NO 840C tool box like for 840D/810D/802D; 3) If your machine configuration is 840C+611D drive, thenyoucanchange it from 840C to 840D . you need to change NCK, HMI, MCP and all PLC IN/out modules. you should well know your PLC program 840C in Step5 so you can transfer them in Step7. but if you have analog drves such as 611A feed and spindle or your machine is runnong good, that is better NOT change it KEEP IT RUN!!! hope that helps |
If you like my comments please |
|
2/15/2010 5:08 PM | |
Posts: 71 Rating:
|
HI Jason |
Follow us on