Helmut_13

Hi,

there is also another limitation in LOGO!.

As you now know you need a "Master" LOGO! collecting the errors from 30 other LOGO!. This is not possible.

One LOGO! can only communicate to up to 16 other LOGO! (8 static and 8 dynamic connections).

So you are at the same point again. Exchange the "errors" between your 30 LOGO! and use one on them as Master (requires to communicate between the 30 LOGO! and more then just two comunication levels).

Or use a HMI whitch support 30 connections to display the errors.

Hope this helps.

 hello, can you help me out with static and dynamic connection. i am trying to connect 13 LOGOs, one as master  others as slave. are these setting be made in logo soft.

------------------------------------------------------------------------------------------
Split from LoGo 0BA8 and TDE Communications.

i think it be much better to clarify my system

1. we have total 13 LOGOs, 4 DO at each LOGO, 5 DI. Any DI will trigger all 52 DO

2.All program will be in the master , others LOGO will serve as slave

3. HOW to configure them on network dynamically as from the manual static connection are limited to 8

4. can i use two masters with slave distributed and communicate between masters only

ixo65

Here is a suggestion on how to connect 13 logos with static connections.
Each logo is Master.
Logo8_8 collects as a client of the servers to Logo8_9 Logo8_13.
Logo8_8 is then Server for the main collector Logo8_1.
Logo8_1 collects as a client of the servers to Logo8_2 Logo8_8.

 Thanks i get it now 

ixo65

Are the DIs push buttons or Switches?

 Push buttons

ixo65

Here is the complete solution.

 Thank you, i really appreciate your help