Hi,

I got the following error when I wanted to downlod my project to the TP:

Download canceled due to a transfer error: 8020AB001A06FFF4

- TP Panel is TP1900 confort.

- I am using Profinet communication

- software: TIA portal V15 update 3

It seems that the changes/project could not be adapted on the TP.

Can you help me what to do?

Note:

- originally the Panel had TIA v13 version but I suceed to change the verison up to V15 when I downloaded first. Than the error come and cancelled the download process - see the attached picture

- There is no any SD card inserted to the TP

- Communication with the TP is fine (as you could also see on the attached picture...)

Many thanks for your feedback in advance!

Regards,

Norbert

Dear AutoGen_657968,

I have like you in our plant and i don't want to make that to avoid any problems.

But according to my experience if there is NO any error during compile the download will be done without any error.

So check compile first.

Many thanks

I have the exact same situation with the exact same problem.  

What is the solution?

Hi All,

For me the solution was:

- Reset the HMI to factory settings,

- OS update to the V15

- Change the HMI type in the device config to V15

I hope this helps.

kiki

How you stop HMIRTm on the panel

 How to do it ?

I have the same problem.

I did next:

1. Reset to Factory Settings

2. Download new version of OS

3. Change version in project HW

4. Download to panel

...but still have problem which is in attachments

The instalation of TP images to TIA Portal has helped to splve the issue.

I fixed it with prosave.

1. Open prosave

2. Connect the panel with prosave

3. Go to tab 'OS Update' 

4. Select correct firmware version and update OS

After this you can download back to the panel.

I hope it will work for you!!

I have the same issue ...

Nothing help.

I can't use OS 16. 

The only solution for me is to work with  TIA V16 with panel OS V15.1