Please ask me how I can connect to  cu320 + 6SL3054-0ED00-1BA0 CARD ?

I have starter 4.3.3, 4.7 , 4.2....

Then I try connect I have "?...... and 4.3.1..." How I can my be upgrade card for version 4.7?

------------------------------------------------------------------------------------------
Split from CU320-2PN V4.3 FIRMWARE SSP.

Hello,

very crazy post, hard to understand!

If you have a CU320-2 (no CU320!) then you can update the FW to V4.7 or higer on the CF in the following way:

Download the FW Files for the version you need
Delete the data on the CF Card (except the KEYS folder)
Extract the files from the downloaded FW to the root of the CF Card
Plug in the CF Card and powerOn the CU320-2

How to connect? This depends which CU you have exactly and how your PC is connected to the CU.
And which STARTER version you have, because a Starter V4.3 doesn't support a FW Version V4.7 of  the CU.

Regards

Christoph

Ok help me  "Download the FW Files for the version you

i don't say that STARTER V4.3 doesn't support a HW V4.3.1.

And i don't know what you mean with HW V4.3.1, the HW CU320 have no version V4.3.1!

So you should give the correct informations and answers to the questions so that we can help you.

At the moment is not really clear what you need exactly and what you would do.

I have machine version 6sl3040-1ma01-0aa0 version 4.2

I can uploaded project. I can converted project.

I have version starter 4.3.3

I have licensed flash card version 4.3.01

Then I try to connect I see only ??? picture

/////////////

Tell me the way to download project in new hard.

----------------------

Смысл проблемы в следующем:

у флеш карты есть заказной номер. от него зависит версия по. при заказе карты нужно точно знать какая версия по на самом деле на  карте. номер один, версия загружена другая.

сконвертировать проект можно. найти версию стартера под флеш карту труднее чем заказать флеш карту под версию стартера.

я столкнулся первый раз с таким поэтому и спрашивал совета.

Hi,

from the Picture you have FW  Version V4.3.1 and not 4.2!

And you have a CU320-2 PN which is not supported in FW Version V4.3.1, so you can only get a ???? and not more.

To work with this CU Type you must update the FW on the CF Card to Version V4.4 or above.
Then you can use this CU Type.

Regards

Christoph

I work in virtual machine and make upload version 4.2/

After I convert for 4.3

let's take on the issue and without emotion

New information:

The hard 6SL3040-1MA01-0AA0 + CARD 6SL3054-0ED00-1BA0

NOT SUPPORT STARTER 4.3.3

THE HARD 6SL3040-1MA00-0AA0 + CARD 6SL3054-0ED00-1BA0

 SUPPORT STARTER 4.3.3

the issue is that this CU320-2 PN don't work with FW Version V4.3.1.

That uis the problem you can solve this only with a FW Update to FW V4.4 or above.

ChristophD

the issue is that this CU320-2 PN don't work with FW Version V4.3.1.

That uis the problem you can solve this only with a FW Update to FW V4.4 or above.

 I solved "problem"

Download 113mb file

https://support.industry.siemens.com/cs/document/92522512/sinamics-s120-firmware-version-4-7-hf27?dti=0&dl=en&lc=ru-RU

save file into flash card and work the GU320 PN this flash  .

Thanks!