hi all,

anybody tell mi how sinamic DC/AC drive's input/output can be configure in S7-1200 plc using profibus. i.e.from datablock and how this data block were reflect in starter software?????????????please tell. much need 

Hello,

if you assign the Drive in TIA to the PLC you can insert in the Drive Device view the telegrams for DataExchange.

Each Telegram Slot get a I/O Adress in the PLC with which you can access the Data.

You can directly use the adresses or you use Function Blocks like DPRD_DAT and DPWR_DAT.

The Datablocks from the S7-1200 PLC are not reflected in STARTER, STARTER is only for commissioning the drive.

Regards

Christoph