hey guys

i wanna start learning motion control but i dont know where i should start,is anyone to guide me?

with best respect

hamed12580

hey guys

i wanna start learning motion control but i dont know where i should start,is anyone to guide me?

with best respect

Hi.

"Motion control" covers a huge technical field.
The type of actuator (example: motor / cylinder), the control technique (fuzzy logic / rule based / mathematical model & closed-loop / open-loop) and signal conditioning (discrete analog / discrete digital / communication) has different approaches.

It would be most helpful if you can zoom in on what you are looking for specifically. Which device or control techniques do you have in mind?

Giving us an idea where to start from will help too. In other words - what knowledge to you have now.

Next the task you need to take on - is it purely academical or is there an application?

Hope to hear from you again.

@Others... Please feel welcome to jump in with contributions.

hi

dear friend i am intermediate in automation,i know about plc s7300/400 configuring and programming and monitoring ,i work in a chipboard production factory ,in there and cutting section there is a diagonal saw that cuts every board and when production speed increases the saw sync its speed also,all thing that i know the plc module that used there is a kind of s7 technology cpu (315T) and as i researched i must know about motion control to understand how this section is programmed,but unfortunatly dont know how can i start ....

Hi,

show here the flying shear applications for S7-300 technology PLC

https://support.industry.siemens.com/cs/ww/en/view/21063352

https://support.industry.siemens.com/cs/ww/en/view/21062270

Regards
Christoph