hi,

its works fine without any prob...try migrating the function from v12 to v13 and see it works ...

i find your configuration also correct ..

Hi,

im just trying to solve my own problem but mayby its the same problem.

Im trying to use function SetBitWhileKeyPressed, SetBitInTag, SetBit, ResetBit to set bit (merker) while operator is pressing function key and reset the same bit on release. I put these function to event Press, Release but it looks like it works oppositely (visa versa). On Press bit is reseted and on Release is setted.

I dont know what is wrong, bit its working as i said ...

Henio.

Hi,

i guess this will not happen can u pls upload the configuration pic in the  button event..

Hi,

here is full project. Look at panel KP400, screen named "Manipulator_pojezd", function keys F5-F8.

Thank You for any advise.

Henio,

Hi Sopla,

u can use setwhileKey pressed alone no need to reset the bit because it will be high when you press alone if u leave it will be low..

note:

in plc logic it is used when as normal coil instead of set bit..

Hi,

so problem is solved, update 6 helped.

Thanks a lot for advise, seems like update 5 had big BUG. (i spend few days to realize out what is going on and to find out how to solve it).

Yes i know, its enought to use SetBitWhileKeyPressed if everything is working propertly. I put there ResetBit just because i didnt know how to solve my problem ...

Once more thank You for answers.

Henio.

K!ke

Hello,

the problem is solved with update 6: https://support.industry.siemens.com/cs/ww/en/view/90466591

K!ke

 Thank you for your answer, update solved my problem.

New question published by Henio is split to a separate thread with the subject List of actualy documented bugs in TIA PORTAL´.

Best regards
Min_Moderator