Please would Some one be able to help me with a sample program for barcode scanner running on S7-1200.

Thanks

----------------------------------------------------------------------------------------------------
Split from Share Samples and Tips Application for PLC S7-1200 & TIA PORTAL.

Thanks for Fwding me the sample program. I actually have problem triggering the rcv block using dpd messaging protocol.Well I am using a datalogic  cbx gateway in the process.

For Ex: I68.0 is used by reader to notify ''slave has written new data so master can read it.

         Q64.0 must be used by plc to notify ''master has read new data so slave can send next message''.

Thanks 

Timlindz

I have 15 barcode scanners  3 are serial and the rest are profinet attached is a profinet sample program guide maybe this is what you are wanting, if you need something different let me know and I can post my FC.

 Hi learner...It would be nice if you can share your project, or at least the all arround the BarCode functionality.

Thanks

Hello and Greetings learner87  could you pass me the program you have, 'to help me as an example,
I have a barcode and plc similar to yours;

thanks in advance for your help

learner87

Please would Some one be able to help me with a sample program for barcode scanner running on S7-1200.

Thanks

----------------------------------------------------------------------------------------------------
Split from Share Samples and Tips Application for PLC S7-1200 & TIA PORTAL.

 good day my dear could you share the programe for reading barcode data and how to handle the data from barcode at the plc . 

Hi, i am also interested in this as ive been asked to make a selection of a barcode scanner and program it. is the example program still available?

Kind regards,

Nick