How Can I download HMI without configuration software with TIA portal?

----------------------------------------------------------------------------------------------------
Split from Pack & Go.

Hello,

what do you mean exactly?
If you have TIA Portal than you have the configuration SW .

Regards

Christoph

Hello Jeetendra

You need always the TIA Portal to load a panel. You can only use a step between. You can load into a Pack and Go File and then you need only a PC with connection to the Panel without TIA Portal (Only simatic Prosave has to be installed).

There are a lot of Information in the TIA Portal Manual.

You can also use an Image so if you have a similar Panel in your office you can create a Backup on USB Stick or Storage Card. You can Restore it into the same Panel at your customer.

Hope it helps

Bye Murof