Hi All,

Sorry to ask this again, but I'm hoping someone could help me solve this.

I have a 802d mill.

I'm getting a 700003 Magazine Counter Error , Code =0

I've searched and searched for a solution but no luck!

Does anyone know how I can clear this? Is there a proceedure avaliable for clearing it?

Any help would be gratefully appreciated.

Thanks,

Brian

Hello,

Alarm no 700003 is PLC alarm & check PLC logic DB1600 0000.3 

Hi,

Thanks for the reply.

I'd read that it was a PLC logic error - the PLC side of the machine is beyond my knowledge right now - and I don't have access to an engineer. 

Is there any information, training , tutorials available anywhere that could guide me through , step-by-step ?

A long shot I know - but kinda stuffed otherwise!

Please download below manual, read chapter 5

802D: Turning, Milling

Or attach your PLC project here so that members of the forum could help you. 

New question published by Tspiszak is split to a separate thread with the subject Sinumeric 802d - Error 700003 and 700001 lubricator error code 1. .

Best regards
Jen_Moderator