Dear friends,

Currently, I have the "6AV6 648-0BC11-3AX0" touch panel, and i am using it for a small project.

I am wondering what is the configuration software for the referred panel, also I need to know what type of programming cable needed to do the programming.

Regards.

Tomy 

Hello Tomy;

If you have the part number of a Siemens modle, you should have no trouble in locating the required information; use the Search Box at the right of this page, and then the link in Product Links.

See what can be found, in the attachment below.

Hope this helps,

Daniel Chartier

Thank you my friend for your reply.

Would you please provide link for WinCC Flexible SP4 

I will be more than greatfull for you.

Best regards.

Tomy

Hello Tomy;

With a very similar technique as described before (but with the name of the product as a search term)

Hope this helps,

Daniel Chartier:

In-fact my friend i do need a link for software download of WinCC flexible 2008 SP4.

The way you showed me sends me to the SP3 version 

Best regards.

Tomy

Hello Tomy;

You have been with us long enough to see that this version of WinCC Flexible (SP4) is not available for download.

You must contact your nearest Siemens rep.if you wnt to purchase it.

Hope this helps,

Daniel Chartier

Is the SP4 version in Chinese language only?

Best regards.

Tomy 

Hello Tomy;

It seems that the WinCC Flexible 2008 SP4 is released for the China marlet only, in order to connect to S7-200 SMART PLCs and SMart HMI panels.

It looks (from the links at the end of the following thread) that it can be programmed in English; but as stated it is released only for the Chinese market.

https://support.industry.siemens.com/cs/document/62851546/delivery-release%3A-service-pack-4-for-simatic-wincc-flexible-2008?dti=0&lc=en-CN

Hope this helps,

Daniel Chartier