Dear members i have a problem in v20 inverter. i need to use 4 pin from DI pins to run a motor in forward and reverse rotation and i have 2 proxi sensors that one for forward and another for reverse stop.if possible when we send command to forward to DI1 motor runs until sensor sens and when sensor sens the metal thing motor should stop. now i want to know how can i use parameters to this object. 

thanks

Use the FFBs (Free Function Blocks - parameters P2800+).

Set P0840 (ON) to (DI1 + NOT(DI3))

Set P0842 (ON_REV) to (DI2 + NOT(DI4))

If you need it to work on a pulse - use RS-FF blocks

P0840 to RS-FF 1, SET it on (DI1 + NOT(DI3)), RESET on DI3 (f.e)

P0842 to RS-FF2, SET on (DI2 + NOT(DI4)), RESET on DI4

thanks for your help. 

New question published by AutoGen_649130 is split to a separate thread with the subject V20 - Can not find the way to use the frequency set by BOP and activate the fixed frequency via digital input.

Best regards
Jen_Moderator