Hello dear all, 

I need to know that what requirements are needed to do OS Simulation in PCS7 without any problem?

Best regards

Tekabi 

Hello Tekabi,

for the OS Simulation you have to note the following:

• At the time of the simulation, there is no communication between the various operator
  stations of your project. As a result, no current data from other servers can be displayed,
  for example, the data of another OS server in an OnlineTrendControl.
• operations which you carry out in the OS simulation have an impact on your

  process.
• Ensure that the symbolic names of each connection (OS - AS, ES - AS) are identical.

  Only then can you simulate the OS on the engineering station after completion of configuration for the purposes of testing all functions.

  For a reference OS, ensure that the symbolic names of the connections (OS - AS, ES - AS) are identical to the base OS.

  Otherwise, connections to the AS via "Named connection" are not possible.
• To avoid the AS generating messages during operation when the OS simulation starts or

  terminated on the engineering station, the connection ID for the engineering station should be

  higher than 0xc00.
  

Hi Heisenberg,

Where can I find documentation that describes this configuration?

Thanks,

gbs

You may refer to this link , search "OS Simulation" Engineering System.

For other manual, please look at this link, Technical Doc.