Dear All,

Is this normal? Been waiting for around 30mins but the "OK and Cancel" button is still disabled. Do I still need to wait?

SIMATIC Manager is already not responding and my only option is to end the process in the task manager.

I can see that the ES was successful in copying the project folder but wasn't able to activate the project.

Regards,

wantutri

Tried again. This is what shows in the log

Source:        D:\IME_MP\IME_Prj\wincproj\OS1\winccom\
Target:        \\Os1\scada\OS1\OS1.mcp
Project type: Master
MAKE:         No
Date:         Tuesday, May 28, 2019 15:17:57

Display load log...
-------------------

5/28/2019 3:18:03 PM : The project was locked.
5/28/2019 3:18:03 PM : The entire WinCC project will be transferred to the runtime OS.
5/28/2019 3:18:03 PM : The target directory can be read and written to.
5/28/2019 3:18:03 PM : No project is open.
5/28/2019 3:18:03 PM : The project should be compiled before downloading.
5/28/2019 3:20:09 PM : Success: Delta compilation was completed successfully.
5/28/2019 3:20:09 PM : The project was opened successfully.
5/28/2019 3:20:11 PM : The Picture Tree was updated in 00:00:01.
5/28/2019 3:20:18 PM : Server data were created successfully.
5/28/2019 3:20:31 PM : The WinCC project is being closed
5/28/2019 3:20:31 PM : The project was locked.
5/28/2019 3:26:38 PM : Caution: The project could not be opened.
5/28/2019 3:37:40 PM : The lock on the project was removed.
5/28/2019 3:37:40 PM : Caution: Downloading the OS failed. Duration: 00:19:37

Still not able to open the project from the ES

Regards,

wantutri

Thanks! I managed to download succesfully by adding the same user for the OS.

I thought that everything's fine as long as the permission for the project folder is correct.

[snip]

Regards,

wantutri

New question published by wantutri is split to a separate thread with the subject Is there a proper way to activate the runtime for the OS?.

Best regards
Jen_Moderator