i want transfert program of machine ( sinamic s120 with simotion d425-2 ) in other virgin machine; 

what is the procedures to folow ??? 

------------------------------------------------------------------------------------------
Split from Communicate S120 drive with CU320-2PN.

hi sir , thank you for repond me , 

yes i have Scout , but i used just the cardReader and i copied the program , 

the program in simotion d425 is ok , all led is green (Run , REDY..) exept led PN is flushing Red with the led BF of ET200M (im153-4PN) ,

the conexion between ET200 and Simotion d is by cable Ethernet 

So what is the problem ?? please  

hi sir how are you , 

 I have already injected the program of Cf card machine in this same vergin machine,  i entred all the

configurations of this type of machine , I positioned the sensors proximity of axe X and axe W as they

are in the first machine -

the problem is that I didn't understand how to position the zero point or there is some operation which I

did not do, when I start the Homing in section 1, the W axis does not stop in the Offset (215), it

continues until the colision with the metale

Help me sir,  Thanx