Hello hdhosseni and smiffy,

Thanks for your inputs and advice. I am converting a communication block into SCL which is already written into STL. I have updated almostwhole code and tested. But when I add a particular function block communication goes off. I am not getting where I should trace into, as blocks are as it is translated into SCL from STL. I have attached file containd SCL code and below that its commented STL code . Please guide me what I am doing wrong...Is my converted code is correct?


Thanks...

Hi Marko Bursic,

Thanks for the information. I have tested logic compiled by SCL with original STL. Logic is working perfectly.

There is aproblem inassigning DATA parameters to TSEND & TRECV function using ANY pointer.

Thanks

prasad.sawantdesai

Hello,

How to write SR flipflop instruction in SCL.
Sample Code :
AN #C1.SEND_BUSY;
S #C1.SEND_REQ_I;
A( ;
O #C1.SEND_DONE;
O #C1.SEND_ERROR;
) ;
R #C1.SEND_REQ_I;
A #C1.SEND_REQ_I;
= #C1.SEND_REQ;

I have converted above code in SCL but its not working well.

IF CONN.SEND_BUSY=FALSE THEN
CONN.SEND_REQ_I := TRUE;
END_IF;
IF CONN.SEND_DONE =TRUE OR CONN.SEND_ERROR = TRUE THEN
CONN.SEND_REQ_I := FALSE;
END_IF;
CONN.SEND_REQ := CONN.SEND_REQ_I ;



Thanks

 Dear prasad.sawantdesai,

can you please give us some more details about your code. In particulare I am interested in the definition of the used variables (static / temp / ...).

Best regard,
yy1