YogendraG

Dear Sir,

In one of my project appliction I want Hot swapping of Signal Module so I have Selected CPU 412-2DP (6ES7 412-2XJ05-0AB0), ET 200M IM 153-2 (6ES7 153-2BA02-0XB0) with active bus module for IM and signal Module.Please let me know whethere this configuration will work for Hot swapping of Signal Module? I have one more doubt I am not using Hot standby system so Can I use Active bus module for single IM (Stand alone)?

Please help me to guide proper hardware selection.

Waiting for your reply.

Regards,

Yogendra G

YogendraG

Dear Sir,

In one of my project appliction I want Hot swapping of Signal Module so I have Selected CPU 412-2DP (6ES7 412-2XJ05-0AB0), ET 200M IM 153-2 (6ES7 153-2BA02-0XB0) with active bus module for IM and signal Module.Please let me know whethere this configuration will work for Hot swapping of Signal Module? I have one more doubt I am not using Hot standby system so Can I use Active bus module for single IM (Stand alone)?

Please help me to guide proper hardware selection.

Waiting for your reply.

Regards,

Yogendra G

Hi

I have same configuration which u told but its not working for me. Please can you guide me.

Thanks

raju

Hello RDD;

You do not realize how frustrating posts like the one you added can be for us. You do not describe your system or give any description of the problems you face,

Without information we cannot help you.

Hope this helps,

Daniel Chartier

YogendraG

Hi All,

Thanks for reply. Just one more query. I have selected following Active bus module for IM .

Active Bus Module PS/IM (1 no.of IM) ---6ES71957HA000XA0

Please let me know for IM active bus module I need complasory PS module with IM OR if only IM can work ?

Waiting for reply.

Regards,

Yogendra G.