Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

CPU firmware upgrade from 2.1 to 2.2

Created by: Rawl at: 5/7/2012 5:27 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/7/2012 5:27 PM	Rate (0)
Rawl Posts: 14 Rating: (1)	hello, I have upgraded cpu 1214C firmware from 2.1 to 2.2 using the 24MB card from siemens on 2 plcs of 1214C.upgrade was successful I tried the same procedure and with the same memory card on 3 new plc of 1214C with firmware 2.1 but it is not successuful.... can anybody plz help me where i am going wrong regards rawlins
Rawl Posts: 14 Rating: (1)
Suggestion To thank Quote Answer

5/7/2012 5:45 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 3/1/2021 Posts: 895 Rating: (40)	Would you please provide snap shot of diagnostics buffer
	Aim Higher
Suggestion To thank Quote Answer

5/7/2012 5:54 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 3/2/2021 Posts: 10196 Rating: (1696)	Rawl hello, I have upgraded cpu 1214C firmware from 2.1 to 2.2 using the 24MB card from siemens on 2 plcs of 1214C.upgrade was successful I tried the same procedure and with the same memory card on 3 new plc of 1214C with firmware 2.1 but it is not successuful.... can anybody plz help me where i am going wrong regards rawlins This may seem like a dumb question, but it happened to me not long ago! Are you using the s7-1214c firmware or perhaps another PLC's firmware was upgraded in the past? Maybe just copy the latest firmware onto your memory card again according to the firmware update instructions. I have noticed that sometimes when I install the MMC into my PC and PLC it does not work the first attempt. It also takes longer to update each time I update one - at least, it seems that way.
	science guy
Suggestion To thank Quote Answer

5/8/2012 7:59 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 9/16/2020 Posts: 2957 Rating: (235)	Rawl hello, I have upgraded cpu 1214C firmware from 2.1 to 2.2 using the 24MB card from siemens on 2 plcs of 1214C.upgrade was successful I tried the same procedure and with the same memory card on 3 new plc of 1214C with firmware 2.1 but it is not successuful.... can anybody plz help me where i am going wrong regards rawlins Please provide more info. What does it mean unsuccessful ? What about diagnostic LEDs ?
	Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on