S1200 not reachable

Hello,

I'm working with S7-1214FC DC/DC/DC . I'm trying to connect (with ethernet cable between pc and plc) to the PLC with TIA Portal V13 SP1 Update 9 . I follow the intructions bellow :

1. I can see in  the net PLC with IP 192.168.0.1 e anothers devices  like a IHM ( 192.168.0.20 ) .
2. When i click in " Flash Led ", the leds of PLC blinking .

3. After, when I click on "Go online"to connect the PLC, the error message appears: " Not reachable"

In Proprieties of "Local Area network for Ipv4" in windows seven, i put :
Ip address : 192.168.0.52
Subnet mask : 255.255.255.0
Default gateway : nothing 

Do you have any ideas to resolve my connection problem ?

In advance,

Thanks

Hi,

it seems you have connection to your S7-1200 because of led flashing...

Is this a new PLC or it´s still running?

Do you have any active firewall ord viruscanner?

Regards,

Towome

I already made a test with the wireless turned off and deactivated too. But unsuccessfully.

And i can make a ping using prompt with PLC, the results of ping is ok.

Hello,

the HMI can be connected?
do you use here the same network and access point like the PLC?

If you try to go online is a dialog displayed where you can search the PLC?

The PLC is direct connected to the PC or is there a Router installed?

Regards

Christoph

Hi Cristopher

Yés , the IHM can be connected.

Yes, i´m using the same netowork and access point like the PLC.

And all devices are connected on router .