Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

saving data blocks on mmc in s7 1200

Created by: boazeventall at: 6/20/2012 9:44 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/20/2012 9:44 AM	Rate (0)
boazeventall Posts: 131 Rating: (4)	i want to save my data blocks on mmc , when i insert the mmc on stop mode i need to configure the "startup after POWER ON" to warm restart-RUN?
boazeventall Posts: 131 Rating: (4)
Suggestion To thank Quote Answer

6/20/2012 3:43 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 3/5/2021 Posts: 10212 Rating: (1699)	boazeventall i want to save my data blocks on mmc , when i insert the mmc on stop mode i need to configure the "startup after POWER ON" to warm restart-RUN? That is how I set all my running system PLCs. Sometimes during development I might set them differently but most all the time, that setting is exactly the right one. Each application is different of course. Note: If you are required to manually restart a PLC for your application every time it stops or power is restored (I've never heard of this, but it is possible), then that setting is not correct.
	science guy
Suggestion To thank Quote Answer

6/20/2012 4:02 PM	Rate (0)
boazeventall Posts: 131 Rating: (4)	i had a problem when i insert the mmc on stop mode and moved him on the same time the plc couldent return to run mode why? and the plc appeard to be not recognized i needed to use the accesseble devices option to return him
boazeventall Posts: 131 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on