Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

SIMATIC WINCC Powerrate 2.0

Created by: anhtuan_ntc at: 3/11/2009 8:29 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/11/2009 8:29 AM	Rate (0)
anhtuan_ntc Posts: 54 Rating: (0)	Hi everyone, Now I ampreparing for a power management control systemproject with many SENTRONPAC3200 devices on Ethernet (With Modbus TCP protocol). The sensors, actuatorsconnect to PAC 3200 through Profibus expansion modules. On the PC, The WINCC V6.2 run as Client to collect data from allfield devices by Modbus TCP OPC server. It's running good. But when Itry to install SIMATIC WINCC Powerrate 2.0 formakingcost center report, caclulating price for electric, using faceplate...But in WINCC 6.2 I could not find any thing ralated Powerrate 2.0 to run. It's generally add -on WinCC automatic. Pls give some advises to use this software. Regards,
anhtuan_ntc Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

3/11/2009 8:46 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 1/7/2021 Posts: 10217 Rating: (1158)	Hello Look at Manual SIMATIC WinCC powerrate Energy management for WinCC (V 2.0) (part 4, 5 ) Hope this will helps. regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on