11/22/2015 2:39 AM | |
Joined: 9/27/2006 Last visit: 5/23/2024 Posts: 12257 Rating: (2668) |
Hello freiz; I believe your first step is to use the following tool provided by Siemens, to validate that your CPU is recognized by TIA Portal: (v13 SP1 check is included in the download) TIA Portal Readiness
check tool : Hope this helps, Daniel Chartier |
11/22/2015 9:27 AM | |
Joined: 5/12/2006 Last visit: 5/14/2024 Posts: 22251 Rating: (2985) |
Hi, or look in the List of Supported HW in this FAQ: https://support.industry.siemens.com/cs/ww/en/view/50029532 If the module is not listed then no integration in tia. For you plc this is the situation, plc is too old. Regards Christoph |
This contribution was helpful to1 thankful Users |
11/22/2015 7:41 PM | |
Posts: 25 Rating: (0) |
Sorry, I downloaded the software but I did not use. How to proceed?
|
11/22/2015 7:43 PM | |
Posts: 25 Rating: (0) |
Thank you. The CLIP I'm trying to download the ladder is on the list, but this list is for TIA V11, it would be the same for the TIA V13? If yes, how to integrate the package to the TIA V13 recognize my CLP?
|
11/23/2015 8:54 AM | |
Joined: 1/21/2013 Last visit: 3/19/2024 Posts: 4618 Rating: (705) |
Hello, But if you use STEP7 Lite for this? Is free SIMATIC Programming with STEP 7 Lite V3.0 - SiemensSTEP 7 Lite V3.0 incl. SP2 Available for Downloading |
This contribution was helpful to1 thankful Users |
Follow us on