Hello,

i have a home network 0ba7 master en 0ba7 slave that works fine,

but now i want a 0ba8 in my network for my heating,

my question, can my 0ba7 master communicate with my logo 0ba8 master ( example switch an output to the other one?)

thank you Fred

Then a data link between the 0BA8 and 0BA7 (Master) must be created.
You create a network project, adds the new device the 0BA8, the 0BA7 (Master) and another 0BA7 (slave). The Ethernet connection is created automatically, it must be only the IP addresses are matched.
Then a data link between the 0BA8 and 0BA7 (Master) must be created.

If you wish, i create you an example.

ixo65

Then a data link between the 0BA8 and 0BA7 (Master) must be created.
You create a network project, adds the new device the 0BA8, the 0BA7 (Master) and another 0BA7 (slave). The Ethernet connection is created automatically, it must be only the IP addresses are matched.
Then a data link between the 0BA8 and 0BA7 (Master) must be created.

If you wish, i create you an example.

 Hello,

Do you have any example of this ?

Thank you.

ixo65

 

jphermans

Hello,

Do you have any example of this ?

Thank you.

What example do you mean exactly?

Or all possible connection types?

I want to use logo8 as master and Logo 7 as slave and this for every possible connection. I also want to use this on Logocontrol web server (http://www.frickelzeugs.de/logocontrol/).

thank you. 

ixo65

Does it have a particular reason why you want to make a master / slave?

Master / Master is better.

Master / Slave runs only in the master a program, the slave-Logo has no program and provides the master only the hardware.
Master / Master, a program can be created in any logo.

 I want to control logo7 outputs  from logo8. Example I1 /logo8 -> Q1 /logo7. 

Thank you.

ixo65

Master / Master is better.

Master / Slave runs only in the master a program, the slave-Logo has no program and provides the master only the hardware.

Master / Master, a program can be created in any logo.

 You say that master/master is better, but is it then also possible to connect a Ix to Qx on different logos in master/master. The example that you have given looks ok but I was wondering why you prefer master/master above master/slave. In the example is it necessary to setup logo8 as master in the settings ?