Difference in connection with two LOGOs in network project and in "tool-->Enthernet Connection".

Hi,

Can you explain me how different when I make connection with two LOGO in network project and in "tool-->Enthernet Connection".

Thanks.

------------------------------------------------------------------------------------------
Split from How to connect two Logo's 8.

Hi Inox65,

Can you explain me more about TSAP in your fourth video?

I read in manual "TSAP: The range in LOGO! Base Module is 20.00 to FF.FF". But when i see in network project, the range is only from 20.00 to 27.00.

ixo65

In network project, you can not not be used under "Tools> Ethernet Connection" the function of generating a connection, it is grayed out (first example).

In the network view, you can connect between 2Llogos
- create by drawing a connecting line between the two Logos. You will need to enter in the link list to be transferred operand itself (second example).
- Or drag as a connecting line of an input in the diagramm of the 1st Logo to an output in the diagram of the second Logo (third example).

In network project to create a connection to a partner (HMI, S7, Handy, etc.) (fourth example).

Example videos attached.

 Hi „ixo65“

I have little different question.

How make connection outside from internet to local LAN to Logo8_1 (of course this logo has fix public IP address) in your examples.  I thing good way is in your first example, but how when"Tools> Ethernet Connection"is dark (impossible)

Thanks

Carlos