4/7/2017 8:37 PM | |
Joined: 4/7/2017 Last visit: 10/28/2018 Posts: 8 Rating:
|
dear sir, I have the same problem (see attached screen shots). My laptop details are IPv6 Address. . . . . . . . . . . : ::5149:c97a:c8f8:9cfd(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 operating system in Windows 10 My Siemens LOGO 8 PLC details are: IP address: 192.168.000.003 subnet mask: 255.255.255.000 gateway: 192.168.000.000 Please help see the attached screen shots thanks husam ------------------------------------------------------------------------------------------ Attachmentsiemens logo plc error log.docx (549 Downloads) |
Last edited by: Min_Moderator at: 4/10/2017 9:35:54 AMNew subject after splitting Last edited by: Min_Moderator at: 4/10/2017 9:37:03 AMAdd quote |
|
4/8/2017 1:53 PM | |
Posts: 67 Rating:
|
They are in the same network then. Ping successful. Are you sure you have chosen the correct hardware? (Ctrl+H) |
4/8/2017 2:28 PM | |
Joined: 4/7/2017 Last visit: 10/28/2018 Posts: 8 Rating:
|
I am using only one PLC and that I am connecting directly to my laptop using ethernet cable supplied by Siemens when I buy the Siemens starter kit Please see the screen shots attached thanks Attachmentsiemens logo plc screen shots.docx (620 Downloads) |
Follow us on