Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Tension Control Mode

Created by: RSid at: 2/4/2017 4:05 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/4/2017 4:05 PM	Rate (0)
RSid Advanced Member Joined: 3/20/2014 Last visit: 8/16/2019 Posts: 77 Rating: (0)	Dear All, Kindly help me out to replace emerson industrial inverter Enydrive TD3300 which has special function of tension control mode with siemens micromaster 440. Regards, RSid

Suggestion To thank Quote Answer

2/16/2017 8:00 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 12/16/2019 Posts: 1514 Rating: (169)	Hi, Tension control can be done using PID. In Micromaster 440 the PID is not so great since the "P" value is only effective value. If the "i" would be working, then the tension control would be great.

Suggestion To thank Quote Answer

2/18/2017 5:50 AM	Rate (0)
RSid Advanced Member Joined: 3/20/2014 Last visit: 8/16/2019 Posts: 77 Rating: (0)	Thanks for your response but how and in which mode of operation it works....

Suggestion To thank Quote Answer

2/18/2017 12:10 PM	Rate (0)
Kbv Silver Member Joined: 7/14/2016 Last visit: 12/14/2019 Posts: 317 Rating: (24)	This will help. https://support.industry.siemens.com/cs/document/22095333/ Kbv
	Last edited by: Kbv at: 2/18/2017 12:12:44 PM Don't just think in terms of solutions... Think in terms of problems also, that will save you from getting into one...
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on