9/21/2015 12:14 PM | |
Joined: 12/18/2014 Last visit: 5/12/2024 Posts: 33019 Rating: (4079) |
Which Logo do you have? |
9/21/2015 12:37 PM | |
Joined: 12/18/2014 Last visit: 5/12/2024 Posts: 33019 Rating: (4079) |
Here's a possible solution, works at 0BA7 and 0BA8.
AttachmentCounts_0BA7.zip (175 Downloads) |
9/21/2015 12:39 PM | |
Posts: 49 Rating: (5) |
Logo 8. Let me take a look at your example. Thanks a lot. |
9/21/2015 12:48 PM | |
Joined: 12/18/2014 Last visit: 5/12/2024 Posts: 33019 Rating: (4079) |
Small mistake.
|
9/26/2015 7:40 AM | |
Posts: 49 Rating: (5) |
Am using OBA8. The Mathematic Instruction doesn't allow references. How do I get abt doing it ? |
9/26/2015 8:02 AM | |
Posts: 49 Rating: (5) |
Got it. https://support.industry.siemens.com/cs/document/109471094/how-can-you-configure-references-between-blocks-in-logo!-8?dti=0&pnid=13617&lc=en-DE |
9/26/2015 8:03 AM | |
Joined: 12/18/2014 Last visit: 5/12/2024 Posts: 33019 Rating: (4079) |
The reference function works at the 0BA8 unlike the previous versions. |
9/27/2015 8:35 AM | |
Joined: 12/27/2006 Last visit: 4/27/2024 Posts: 1196 Rating: (113) |
Your programm works good, but you can delete several Blocks and it stil working. Also works on 0BA6 AttachmentCounts_0BA7-V2.zip (168 Downloads) |
Follow us on