6/27/2017 9:55 AM | |
Joined: 2/4/2015 Last visit: 7/26/2023 Posts: 64 Rating: (0) |
Hi all, I am having a similar situation where there is no led indication in CP. Checked the connection and found ok. In program send request is getting high. But it is not getting reset as neither done nor error is coming. Plz guide. ------------------------------------------------------------------------------------------ |
Last edited by: Min_Moderator at: 6/27/2017 10:57:41 AMNew subject after splitting |
|
6/27/2017 12:57 PM | |
Joined: 7/20/2015 Last visit: 5/9/2024 Posts: 153 Rating: (27) |
Which configuration are doing with CP341(MODBUS MASTER/SLAVE) IF you are using modbus master try this Docs AttachmentModbus Commnication RTU.docx (109 Downloads) |
Last edited by: Sandeep Bakoliya at: 6/27/2017 1:00:13 PMRegards |
|
6/27/2017 1:26 PM | |
Joined: 4/28/2015 Last visit: 2/7/2024 Posts: 10533 Rating: (819) |
Hello, you can also look to this manual (attachment). Attachments7300_modbus_master_operating_instructions_en-US_en-US.pdf (128 Downloads) |
With best regards... |
|
Follow us on