Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Project screen resolution in script

Created by: alexandru.tanea.ipec at: 1/17/2020 11:20 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

1/17/2020 11:20 AM	Rate (0)
alexandru.tanea.ipec Regular Member Joined: 2/7/2017 Last visit: 6/26/2023 Posts: 10 Rating: (0)	Hello guys, I am looking for a workaround to change the project screen reolution from scrpt, because i have the same project on different PC's (Windows 7 baseed ) with WinCC Flexible 2008 . Because the PC's aren't all the same configuration, same monitors the resolution it is different fom one to another, and i would like to adapt my project in full screen mode for each PC with it's screen resolution and not make X versions of the project with different resolution. It is possible to do so ?

Suggestion To thank Quote Answer

1/29/2020 9:00 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 9/12/2025 Posts: 16409 Rating: (1935)	Hello alexandru In WinCC flexible (or also WinCC Advanced in TIA Portal) there will be a compiled Runtime File in which all the Information from the project will be generated. The Screen Resolution is a basic Property in WinCC flexible, you cannot change this in Runtime. You have to set the Screen resolution and then you have to compile again and use this Runitme files. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Hti_automation

5/29/2020 11:10 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8171 Rating: (174)	New question published by AutoGen_9504195 is split to a separate thread with the subject WinCC Unified: Project screen resolution in script. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on