4/18/2015 10:11 PM | |
Joined: 3/12/2015 Last visit: 5/8/2024 Posts: 1 Rating: (0) |
hi, i have the same problem via tia v13 sp1 upd 2 .. ;(( |
4/18/2015 10:38 PM | |
Posts: 5225 Rating: (1187) |
..trying to be the catalyst for finding a solution.. Also make 100% sure you do have the version installed - some had issues (other updates) that the software did not fully update as it should. Else please consider [FORMAL SUPPORT REQUEST] w |
7/10/2015 2:39 PM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4774 Rating: (123) |
|
8/18/2015 10:28 AM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4774 Rating: (123) |
New question published by jhon benil is split to a separate thread with the subject Modbus communication module 1241 comunication problem. Best regards |
4/28/2016 9:01 AM | |
Joined: 4/21/2006 Last visit: 4/16/2024 Posts: 510 Rating: (24) |
New question published by Chaya Naga Sumanth is split to a separate thread with the subject Parity, framing or overrun error. Best regards |
2/20/2017 3:22 PM | |
Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4774 Rating: (123) |
New question published by Chaya Naga Sumanth is split to a separate thread with the subject CB 1241, getting BUSY signal. Best regards |
Follow us on